SD916 Steam Shower Cabin...

The SD916 is low step entry steam shower cabin. The SD916 has all the features you could want in a shower cabin - monsoon rain top shower, hand shower and riser, back jets and of course powerful 3kw steam generator. The unit has an LED roof light, o3, ventilation and built in FM radio too. The back inside walls of the cabin are white acrylic with a fitted shelf and mirror.

Installation Notes:
Electrical: This steam shower cabin requires 1 x 13amp electrical supply. It comes with a plug and RCD fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the unit.
Water: The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 1-3 bar. If using a gravity fed system we recommend you use a pump, to provide the required water pressures. In order to ensure that your steam shower, whirlpool bath or shower cabin offers you a long and trouble free service it is important to get the installation correct. One of the main requirements for your purchase is an appropriate water supply. The Optional pressure equalising valve is designed to supply both hot and cold water from its outlet at equal pressures, regardless of any fluctuations in the supply up to the valve.

• Remote Control
• Electronic steam time & temperature control
• Thermostatic Shower Valve
• Tropical Monsoon Top Shower
• 6 Hydro massage body jets
• Multi function hand shower
• Built-in FM radio with cd/mp3 input
• Control panel
• Extractor Fan
• Toiletries Shelf
• Low voltage ceiling lighting
• Mirror
• Built in seat
• Ozone Sterilization (o3)
• 3kw Steam generator
• Optional pressure equalising valve

Dimensions (mm):

• Cabin: Height 2300, Width 900, depth 900